[v5,2/6] ARM: dts: imx28: add pwm7 muxing options
diff mbox series

Message ID 20250530160748.2476088-3-dario.binacchi@amarulasolutions.com
State New
Headers show
Series
  • Support i.MX28 Amarula rmm board
Related show

Commit Message

Dario Binacchi May 30, 2025, 4:07 p.m. UTC 
Add alternative pinmuxing for pwm7.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>

---

Changes in v5:
- Add Reviewed-by tag of Frank Li

Changes in v3:
- Add commit body

 arch/arm/boot/dts/nxp/mxs/imx28.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

Patch
diff mbox series 

diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
index bbea8b77386f..ece46d0e7c7f 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
@@ -755,6 +755,16 @@  MX28_PAD_PWM4__PWM_4
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				pwm7_pins_a: pwm7@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF1_SDATA0__PWM_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				lcdif_24bit_pins_a: lcdif-24bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <