| Message ID | 20250610100139.2476555-3-dario.binacchi@amarulasolutions.com |
|---|---|
| State | New |
| Headers | show |
| Series |
|
| Related | show |
On Tue, Jun 10, 2025 at 12:00:15PM +0200, Dario Binacchi wrote: > Support Engicam MicroGEA-MX6UL SoM with: > > - 256 Mbytes NAND Flash > - 512 Mbytes DRAM DDR2 > - Ethernet MAC > > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> > > --- > > Changes in v3: > - Drop an extra blank line from the iomuxc node. > > Changes in v2: > - Change local-mac-address to 00 00 00 00 00 00. The actual value will > be set by the bootloader. The previous one was assigned to Freescale > Semiconductor. > > .../dts/nxp/imx/imx6ull-engicam-microgea.dtsi | 95 +++++++++++++++++++ > 1 file changed, 95 insertions(+) > create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi > new file mode 100644 > index 000000000000..43518bf07602 > --- /dev/null > +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi > @@ -0,0 +1,95 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com> > + * Copyright (C) 2025 Engicam srl > + */ > + > +/dts-v1/; > + > + #include "imx6ull.dtsi" > + > +/ { > + compatible = "engicam,microgea-imx6ull", "fsl,imx6ull"; > + > + memory@80000000 { > + device_type = "memory"; > + reg = <0x80000000 0x20000000>; > + }; > +}; > + > +&fec1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_phy_reset>; > + phy-mode = "rmii"; > + phy-handle = <ðphy0>; > + local-mac-address = [00 00 00 00 00 00]; > + status = "okay"; > + > + mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + > + ethphy0: ethernet-phy@0 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0>; > + reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; > + reset-assert-us = <4000>; > + reset-deassert-us = <4000>; > + }; > + }; > +}; > + > +/* NAND */ > +&gpmi { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpmi_nand>; > + nand-ecc-mode = "hw"; > + nand-ecc-strength = <0>; > + nand-ecc-step-size = <0>; > + nand-on-flash-bbt; > + status = "okay"; > +}; > + > +&iomuxc { > + pinctrl_enet1: enet1grp { > + fsl,pins = < > + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 > + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 > + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 > + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 > + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 > + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 > + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b009 > + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 > + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 > + >; > + }; > + > + pinctrl_gpmi_nand: gpminandgrp { > + fsl,pins = < > + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 > + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 > + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 > + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000 > + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 > + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 > + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 > + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 > + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 > + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 > + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 > + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 > + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 > + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 > + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 > + >; > + }; > +}; > + > +&iomuxc_snvs { > + pinctrl_phy_reset: phy-resetgrp { > + fsl,pins = < > + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 > + >; > + }; > +}; > -- > 2.43.0 > To unsubscribe from this group and stop receiving emails from it, send an email to linux-amarula+unsubscribe@amarulasolutions.com.
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi new file mode 100644 index 000000000000..43518bf07602 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com> + * Copyright (C) 2025 Engicam srl + */ + +/dts-v1/; + + #include "imx6ull.dtsi" + +/ { + compatible = "engicam,microgea-imx6ull", "fsl,imx6ull"; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_phy_reset>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + local-mac-address = [00 00 00 00 00 00]; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <4000>; + reset-deassert-us = <4000>; + }; + }; +}; + +/* NAND */ +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <0>; + nand-ecc-step-size = <0>; + nand-on-flash-bbt; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b009 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 + >; + }; +}; + +&iomuxc_snvs { + pinctrl_phy_reset: phy-resetgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 + >; + }; +};
Support Engicam MicroGEA-MX6UL SoM with: - 256 Mbytes NAND Flash - 512 Mbytes DRAM DDR2 - Ethernet MAC Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> --- Changes in v3: - Drop an extra blank line from the iomuxc node. Changes in v2: - Change local-mac-address to 00 00 00 00 00 00. The actual value will be set by the bootloader. The previous one was assigned to Freescale Semiconductor. .../dts/nxp/imx/imx6ull-engicam-microgea.dtsi | 95 +++++++++++++++++++ 1 file changed, 95 insertions(+) create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi