[10/15] arm64: dts: st: add spi1 pins for stm32mp25
diff mbox series

Message ID 20260515151036.1851820-10-dario.binacchi@amarulasolutions.com
State New
Headers show
Series
  • [01/15] dt-bindings: arm: stm32: support Engicam MicroGEA-STM32MP257-RMM board
Related show

Commit Message

Dario Binacchi May 15, 2026, 3:10 p.m. UTC 
Add the spi1 pins used on MicroGEA-STM32MP257-RMM board.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
 arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

Patch
diff mbox series 

diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
index 1c8696024da0..f7bcd6435f39 100644
--- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
@@ -702,6 +702,30 @@  pins {
 		};
 	};
 
+	/omit-if-no-ref/
+	spi1_pins_a: spi1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 6, AF3)>, /* SPI1_SCK */
+				 <STM32_PINMUX('I', 5, AF3)>; /* SPI1_MOSI */
+			drive-push-pull;
+			bias-disable;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 12, AF3)>; /* SPI1_MISO */
+			bias-disable;
+		};
+	};
+
+	/omit-if-no-ref/
+	spi1_sleep_pins_a: spi1-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 6, ANALOG)>, /* SPI1_SCK */
+				 <STM32_PINMUX('I', 5, ANALOG)>, /* SPI1_MOSI */
+				 <STM32_PINMUX('F', 12, ANALOG)>; /* SPI1_MISO */
+		};
+	};
+
 	/omit-if-no-ref/
 	spi3_pins_a: spi3-0 {
 		pins1 {