[07/10] drm: bridge: samsung-dsim: don't re-activate the bridge if already setup
Commit Message
The patch does not re-execute the hardware initialization/activation
procedure for the bridge if it is already operational.
This feature is crucial when supporting the simple framebuffer, as the
controller has already been initialized by the bootloader.
Co-Developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
drivers/gpu/drm/bridge/samsung-dsim.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
@@ -1912,6 +1912,7 @@ int samsung_dsim_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct samsung_dsim *dsi;
+ bool initialized;
int ret, i;
dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
@@ -1989,6 +1990,13 @@ int samsung_dsim_probe(struct platform_device *pdev)
dsi->bridge.funcs = &samsung_dsim_bridge_funcs;
dsi->bridge.of_node = dev->of_node;
dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
+ initialized = of_property_read_bool(dev->of_node, "samsung,boot-on");
+ if (initialized) {
+ dsi->state = DSIM_STATE_INITIALIZED | DSIM_STATE_ENABLED;
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret)
+ goto err_disable_runtime;
+ }
/* DE_LOW: i.MX8M Mini/Nano LCDIF-DSIM glue logic inverts HS/VS/DE */
if (dsi->plat_data->hw_type == DSIM_TYPE_IMX8MM)
@@ -1999,11 +2007,14 @@ int samsung_dsim_probe(struct platform_device *pdev)
if (dsi->plat_data->host_ops && dsi->plat_data->host_ops->register_host) {
ret = dsi->plat_data->host_ops->register_host(dsi);
if (ret)
- goto err_disable_runtime;
+ goto err_put_runtime;
}
return 0;
+err_put_runtime:
+ if (initialized)
+ pm_runtime_put_sync(dev);
err_disable_runtime:
pm_runtime_disable(dev);