diff mbox series

[v6,12/18] dt-bindings: clock: imx8m-clock: add PLLs

Message ID 20241222170534.3621453-13-dario.binacchi@amarulasolutions.com
State New
Headers
Series Support spread spectrum clocking for i.MX8N PLLs |

Commit Message

Dario Binacchi Dec. 22, 2024, 5:04 p.m. UTC 
Though adding the PLLs to clocks and clock-names properties will break
the ABI, it is required to accurately describe the hardware. Indeed,
the Clock Control Module (CCM) receives clocks from the PLLs and
oscillators and generates clocks for on-chip peripherals.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

---

Changes in v6:
- New

 .../bindings/clock/imx8m-clock.yaml           | 27 ++++++++++++++-----
 1 file changed, 21 insertions(+), 6 deletions(-)

Comments

'Abel Vesa' via Amarula Linux Dec. 23, 2024, 3:06 p.m. UTC | #1 
On Sun, Dec 22, 2024 at 06:04:27PM +0100, Dario Binacchi wrote:
> Though adding the PLLs to clocks and clock-names properties will break
> the ABI, it is required to accurately describe the hardware. Indeed,
> the Clock Control Module (CCM) receives clocks from the PLLs and
> oscillators and generates clocks for on-chip peripherals.
> 
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> 
> ---
> 
> Changes in v6:
> - New

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

To unsubscribe from this group and stop receiving emails from it, send an email to linux-amarula+unsubscribe@amarulasolutions.com.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
index c643d4a81478..05bc01960045 100644
--- a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
@@ -29,12 +29,12 @@  properties:
     maxItems: 2
 
   clocks:
-    minItems: 6
-    maxItems: 7
+    minItems: 7
+    maxItems: 10
 
   clock-names:
-    minItems: 6
-    maxItems: 7
+    minItems: 7
+    maxItems: 10
 
   '#clock-cells':
     const: 1
@@ -86,6 +86,10 @@  allOf:
             - description: ext2 clock input
             - description: ext3 clock input
             - description: ext4 clock input
+            - description: audio1 PLL input
+            - description: audio2 PLL input
+            - description: dram PLL input
+            - description: video PLL input
 
         clock-names:
           items:
@@ -95,20 +99,31 @@  allOf:
             - const: clk_ext2
             - const: clk_ext3
             - const: clk_ext4
+            - const: audio_pll1
+            - const: audio_pll2
+            - const: dram_pll
+            - const: video_pll
 
 additionalProperties: false
 
 examples:
   # Clock Control Module node:
   - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+
     clock-controller@30380000 {
         compatible = "fsl,imx8mm-ccm";
         reg = <0x30380000 0x10000>;
         #clock-cells = <1>;
         clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
-                 <&clk_ext3>, <&clk_ext4>;
+                 <&clk_ext3>, <&clk_ext4>,
+                 <&anatop IMX8MM_ANATOP_AUDIO_PLL1>,
+                 <&anatop IMX8MM_ANATOP_AUDIO_PLL1>,
+                 <&anatop IMX8MM_ANATOP_DRAM_PLL>,
+                 <&anatop IMX8MM_ANATOP_VIDEO_PLL>;
         clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
-                      "clk_ext3", "clk_ext4";
+                      "clk_ext3", "clk_ext4", "audio_pll1", "audio_pll2",
+                      "dram_pll", "video_pll";
     };
 
   - |