mbox

[v2,00/10] Support Engicam MicroGEA boards

Message ID 20250609101637.2322809-1-dario.binacchi@amarulasolutions.com
Headers

Message

Dario Binacchi June 9, 2025, 10:15 a.m. UTC 
The series adds support for Engicam MicroGEA boards:

- BMM
- RMM
- GTW

based on MicroGEA-MX6UL SoM.

Changes in v2:
- Change local-mac-address to 00 00 00 00 00 00. The actual value will
  be set by the bootloader. The previous one was assigned to Freescale
  Semiconductor.
- Move iomuxc and iomuxc_snvs nodes to the end of the DTS files.
- Drop an extra blank line from the DTS file.

Dario Binacchi (10):
  dt-bindings: arm: fsl: support Engicam MicroGEA BMM board
  ARM: dts: imx6ul: support Engicam MicroGEA-MX6UL SoM
  ARM: dts: imx6ul: support Engicam MicroGEA BMM board
  ARM: imx_v6_v7_defconfig: cleanup mxs_defconfig
  ARM: imx_v6_v7_defconfig: select CONFIG_INPUT_PWM_BEEPER
  dt-bindings: arm: fsl: support Engicam MicroGEA RMM board
  ARM: dts: imx6ul: support Engicam MicroGEA RMM board
  dt-bindings: arm: fsl: support Engicam MicroGEA GTW board
  ARM: dts: imx6ul: support Engicam MicroGEA GTW board
  ARM: imx_v6_v7_defconfig: select CONFIG_USB_HSIC_USB3503

 .../devicetree/bindings/arm/fsl.yaml          |   9 +
 arch/arm/boot/dts/nxp/imx/Makefile            |   3 +
 .../nxp/imx/imx6ull-engicam-microgea-bmm.dts  | 305 +++++++++++++++
 .../nxp/imx/imx6ull-engicam-microgea-gtw.dts  | 163 ++++++++
 .../nxp/imx/imx6ull-engicam-microgea-rmm.dts  | 362 ++++++++++++++++++
 .../dts/nxp/imx/imx6ull-engicam-microgea.dtsi |  96 +++++
 arch/arm/configs/imx_v6_v7_defconfig          |  27 +-
 7 files changed, 944 insertions(+), 21 deletions(-)
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-gtw.dts
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi