[RESEND,v2,2/6] ARM: dts: stm32: add pin map for LTDC on stm32f7

Message ID 20230607063139.621351-3-dario.binacchi@amarulasolutions.com
State New
Headers show
Series
  • Add display support on the stm32f746-disco board
Related show

Commit Message

Dario Binacchi June 7, 2023, 6:31 a.m. UTC
Add pin configurations for using LTDC (LCD-tft Display Controller) on
stm32f746-disco board.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---

(no changes since v1)

 arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

Comments

Alexandre TORGUE June 8, 2023, 12:42 p.m. UTC | #1
Hi Dario

On 6/7/23 08:31, Dario Binacchi wrote:
> Add pin configurations for using LTDC (LCD-tft Display Controller) on
> stm32f746-disco board.
> 
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> ---
> 
> (no changes since v1)
> 
>   arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++++++++++++
>   1 file changed, 35 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
> index 9f65403295ca..f3f90b9bcd61 100644
> --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
> @@ -365,6 +365,41 @@ pins2 {
>   					bias-pull-up;
>   				};
>   			};
> +
> +
> +			ltdc_pins_a: ltdc-pins-a-0 {

  ltdc-pins-a-0 -->  ltdc-pins-0 is a bit cleaner. I know that I have to 
fix sdio pins nodes in this file to keep the same spirit for all group 
names.

If there is no V3 I wil do it directly when I'll apply DT patches if you 
agree.

Alex


> +				pins {
> +					pinmux = <STM32_PINMUX('E', 4, AF14)>, /* LCD_B0 */
> +						 <STM32_PINMUX('G',12, AF9)>,  /* LCD_B4 */
> +						 <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */
> +						 <STM32_PINMUX('I',10, AF14)>, /* LCD_HSYNC */
> +						 <STM32_PINMUX('I',14, AF14)>, /* LCD_CLK */
> +						 <STM32_PINMUX('I',15, AF14)>, /* LCD_R0 */
> +						 <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
> +						 <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
> +						 <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
> +						 <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
> +						 <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
> +						 <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */
> +						 <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
> +						 <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
> +						 <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
> +						 <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
> +						 <STM32_PINMUX('J',10, AF14)>, /* LCD_G3 */
> +						 <STM32_PINMUX('J',11, AF14)>, /* LCD_G4 */
> +						 <STM32_PINMUX('J',13, AF14)>, /* LCD_B1 */
> +						 <STM32_PINMUX('J',14, AF14)>, /* LCD_B2 */
> +						 <STM32_PINMUX('J',15, AF14)>, /* LCD_B3 */
> +						 <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
> +						 <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
> +						 <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
> +						 <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
> +						 <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
> +						 <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */
> +						 <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */
> +					slew-rate = <2>;
> +				};
> +			};
>   		};
>   	};
>   };
Dario Binacchi June 9, 2023, 6:21 a.m. UTC | #2
Hi Alexandre,

On Thu, Jun 8, 2023 at 2:42 PM Alexandre TORGUE
<alexandre.torgue@foss.st.com> wrote:
>
> Hi Dario
>
> On 6/7/23 08:31, Dario Binacchi wrote:
> > Add pin configurations for using LTDC (LCD-tft Display Controller) on
> > stm32f746-disco board.
> >
> > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> > ---
> >
> > (no changes since v1)
> >
> >   arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++++++++++++
> >   1 file changed, 35 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
> > index 9f65403295ca..f3f90b9bcd61 100644
> > --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
> > +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
> > @@ -365,6 +365,41 @@ pins2 {
> >                                       bias-pull-up;
> >                               };
> >                       };
> > +
> > +
> > +                     ltdc_pins_a: ltdc-pins-a-0 {
>
>   ltdc-pins-a-0 -->  ltdc-pins-0 is a bit cleaner. I know that I have to
> fix sdio pins nodes in this file to keep the same spirit for all group
> names.

I have looked at the file arch/arm/boot/dts/stm32f7-pinctrl.dtsi, and
based on the following nodes:
usart1_pins_a: usart1-0
i2c1_pins_b: i2c1-0
can1_pins_a: can1-0

I have decided to rename ltdc-pins-a-0 to ltdc-0.

I hope you agree.

Thanks and regards,

Dario

>
> If there is no V3 I wil do it directly when I'll apply DT patches if you
> agree.
>
> Alex
>
>
> > +                             pins {
> > +                                     pinmux = <STM32_PINMUX('E', 4, AF14)>, /* LCD_B0 */
> > +                                              <STM32_PINMUX('G',12, AF9)>,  /* LCD_B4 */
> > +                                              <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */
> > +                                              <STM32_PINMUX('I',10, AF14)>, /* LCD_HSYNC */
> > +                                              <STM32_PINMUX('I',14, AF14)>, /* LCD_CLK */
> > +                                              <STM32_PINMUX('I',15, AF14)>, /* LCD_R0 */
> > +                                              <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
> > +                                              <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
> > +                                              <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
> > +                                              <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
> > +                                              <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
> > +                                              <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */
> > +                                              <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
> > +                                              <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
> > +                                              <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
> > +                                              <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
> > +                                              <STM32_PINMUX('J',10, AF14)>, /* LCD_G3 */
> > +                                              <STM32_PINMUX('J',11, AF14)>, /* LCD_G4 */
> > +                                              <STM32_PINMUX('J',13, AF14)>, /* LCD_B1 */
> > +                                              <STM32_PINMUX('J',14, AF14)>, /* LCD_B2 */
> > +                                              <STM32_PINMUX('J',15, AF14)>, /* LCD_B3 */
> > +                                              <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
> > +                                              <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
> > +                                              <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
> > +                                              <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
> > +                                              <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
> > +                                              <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */
> > +                                              <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */
> > +                                     slew-rate = <2>;
> > +                             };
> > +                     };
> >               };
> >       };
> >   };
>
Alexandre TORGUE June 12, 2023, 7:35 a.m. UTC | #3
hi Dario

On 6/9/23 08:21, Dario Binacchi wrote:
> Hi Alexandre,
> 
> On Thu, Jun 8, 2023 at 2:42 PM Alexandre TORGUE
> <alexandre.torgue@foss.st.com> wrote:
>>
>> Hi Dario
>>
>> On 6/7/23 08:31, Dario Binacchi wrote:
>>> Add pin configurations for using LTDC (LCD-tft Display Controller) on
>>> stm32f746-disco board.
>>>
>>> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
>>> ---
>>>
>>> (no changes since v1)
>>>
>>>    arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++++++++++++
>>>    1 file changed, 35 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
>>> index 9f65403295ca..f3f90b9bcd61 100644
>>> --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
>>> +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
>>> @@ -365,6 +365,41 @@ pins2 {
>>>                                        bias-pull-up;
>>>                                };
>>>                        };
>>> +
>>> +
>>> +                     ltdc_pins_a: ltdc-pins-a-0 {
>>
>>    ltdc-pins-a-0 -->  ltdc-pins-0 is a bit cleaner. I know that I have to
>> fix sdio pins nodes in this file to keep the same spirit for all group
>> names.
> 
> I have looked at the file arch/arm/boot/dts/stm32f7-pinctrl.dtsi, and
> based on the following nodes:
> usart1_pins_a: usart1-0
> i2c1_pins_b: i2c1-0
> can1_pins_a: can1-0
> 
> I have decided to rename ltdc-pins-a-0 to ltdc-0.
> 
> I hope you agree.

Yes! perfect.

Alex

> 
> Thanks and regards,
> 
> Dario
> 
>>
>> If there is no V3 I wil do it directly when I'll apply DT patches if you
>> agree.
>>
>> Alex
>>
>>
>>> +                             pins {
>>> +                                     pinmux = <STM32_PINMUX('E', 4, AF14)>, /* LCD_B0 */
>>> +                                              <STM32_PINMUX('G',12, AF9)>,  /* LCD_B4 */
>>> +                                              <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */
>>> +                                              <STM32_PINMUX('I',10, AF14)>, /* LCD_HSYNC */
>>> +                                              <STM32_PINMUX('I',14, AF14)>, /* LCD_CLK */
>>> +                                              <STM32_PINMUX('I',15, AF14)>, /* LCD_R0 */
>>> +                                              <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
>>> +                                              <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
>>> +                                              <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
>>> +                                              <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
>>> +                                              <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
>>> +                                              <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */
>>> +                                              <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
>>> +                                              <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
>>> +                                              <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
>>> +                                              <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
>>> +                                              <STM32_PINMUX('J',10, AF14)>, /* LCD_G3 */
>>> +                                              <STM32_PINMUX('J',11, AF14)>, /* LCD_G4 */
>>> +                                              <STM32_PINMUX('J',13, AF14)>, /* LCD_B1 */
>>> +                                              <STM32_PINMUX('J',14, AF14)>, /* LCD_B2 */
>>> +                                              <STM32_PINMUX('J',15, AF14)>, /* LCD_B3 */
>>> +                                              <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
>>> +                                              <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
>>> +                                              <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
>>> +                                              <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
>>> +                                              <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
>>> +                                              <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */
>>> +                                              <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */
>>> +                                     slew-rate = <2>;
>>> +                             };
>>> +                     };
>>>                };
>>>        };
>>>    };
>>
> 
>

Patch

diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
index 9f65403295ca..f3f90b9bcd61 100644
--- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
@@ -365,6 +365,41 @@  pins2 {
 					bias-pull-up;
 				};
 			};
+
+
+			ltdc_pins_a: ltdc-pins-a-0 {
+				pins {
+					pinmux = <STM32_PINMUX('E', 4, AF14)>, /* LCD_B0 */
+						 <STM32_PINMUX('G',12, AF9)>,  /* LCD_B4 */
+						 <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */
+						 <STM32_PINMUX('I',10, AF14)>, /* LCD_HSYNC */
+						 <STM32_PINMUX('I',14, AF14)>, /* LCD_CLK */
+						 <STM32_PINMUX('I',15, AF14)>, /* LCD_R0 */
+						 <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
+						 <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
+						 <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
+						 <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
+						 <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
+						 <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */
+						 <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
+						 <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
+						 <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
+						 <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
+						 <STM32_PINMUX('J',10, AF14)>, /* LCD_G3 */
+						 <STM32_PINMUX('J',11, AF14)>, /* LCD_G4 */
+						 <STM32_PINMUX('J',13, AF14)>, /* LCD_B1 */
+						 <STM32_PINMUX('J',14, AF14)>, /* LCD_B2 */
+						 <STM32_PINMUX('J',15, AF14)>, /* LCD_B3 */
+						 <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
+						 <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
+						 <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
+						 <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
+						 <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
+						 <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */
+						 <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */
+					slew-rate = <2>;
+				};
+			};
 		};
 	};
 };