diff mbox series

board: freescale: imx8mn_evk: let clock system enable UART clock

Message ID 20250520090241.926812-1-dario.binacchi@amarulasolutions.com
State New
Headers
Series board: freescale: imx8mn_evk: let clock system enable UART clock |

Commit Message

Dario Binacchi May 20, 2025, 9:02 a.m. UTC 
From: Michael Trimarchi <michael@amarulasolutions.com>

Now that the UART driver can enable the required clocks, remove
the hard-coded clock enable.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

---

 board/freescale/imx8mn_evk/spl.c | 2 --
 1 file changed, 2 deletions(-)

Comments

Fabio Estevam May 20, 2025, noon UTC | #1 
On Tue, May 20, 2025 at 6:02 AM Dario Binacchi
<dario.binacchi@amarulasolutions.com> wrote:
>
> From: Michael Trimarchi <michael@amarulasolutions.com>
>
> Now that the UART driver can enable the required clocks, remove
> the hard-coded clock enable.
>
> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

Thanks for the cleanup:

Tested-by: Fabio Estevam <festevam@gmail.com>

To unsubscribe from this group and stop receiving emails from it, send an email to linux-amarula+unsubscribe@amarulasolutions.com.
Fabio Estevam May 22, 2025, 1:06 p.m. UTC | #2 
On Tue, May 20, 2025 at 6:02 AM Dario Binacchi
<dario.binacchi@amarulasolutions.com> wrote:
>
> From: Michael Trimarchi <michael@amarulasolutions.com>
>
> Now that the UART driver can enable the required clocks, remove
> the hard-coded clock enable.
>
> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

Applied, thanks.

To unsubscribe from this group and stop receiving emails from it, send an email to linux-amarula+unsubscribe@amarulasolutions.com.
diff mbox series

Patch

diff --git a/board/freescale/imx8mn_evk/spl.c b/board/freescale/imx8mn_evk/spl.c
index 231b9289eead..f96f5c45789a 100644
--- a/board/freescale/imx8mn_evk/spl.c
+++ b/board/freescale/imx8mn_evk/spl.c
@@ -115,8 +115,6 @@  void board_init_f(ulong dummy)
 
 	arch_cpu_init();
 
-	init_uart_clk(1);
-
 	timer_init();
 
 	/* Clear the BSS. */