diff mbox series

[v2,2/4] ARM: dts: imx28: add pwm7 muxing options

Message ID 20250528121306.1464830-3-dario.binacchi@amarulasolutions.com
State New
Headers
Series Support i.MX28 Amarula rmm board |

Commit Message

Dario Binacchi May 28, 2025, 12:11 p.m. UTC 
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---

(no changes since v1)

 arch/arm/boot/dts/nxp/mxs/imx28.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Frank Li May 28, 2025, 3:04 p.m. UTC | #1 
On Wed, May 28, 2025 at 02:11:39PM +0200, Dario Binacchi wrote:

Need commit message here, you can copy subject to here.

Frank

> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> ---
>
> (no changes since v1)
>
>  arch/arm/boot/dts/nxp/mxs/imx28.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
> index bbea8b77386f..ece46d0e7c7f 100644
> --- a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
> +++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
> @@ -755,6 +755,16 @@ MX28_PAD_PWM4__PWM_4
>  					fsl,pull-up = <MXS_PULL_DISABLE>;
>  				};
>
> +				pwm7_pins_a: pwm7@0 {
> +					reg = <0>;
> +					fsl,pinmux-ids = <
> +						MX28_PAD_SAIF1_SDATA0__PWM_7
> +					>;
> +					fsl,drive-strength = <MXS_DRIVE_4mA>;
> +					fsl,voltage = <MXS_VOLTAGE_HIGH>;
> +					fsl,pull-up = <MXS_PULL_DISABLE>;
> +				};
> +
>  				lcdif_24bit_pins_a: lcdif-24bit@0 {
>  					reg = <0>;
>  					fsl,pinmux-ids = <
> --
> 2.43.0
>

To unsubscribe from this group and stop receiving emails from it, send an email to linux-amarula+unsubscribe@amarulasolutions.com.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
index bbea8b77386f..ece46d0e7c7f 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
@@ -755,6 +755,16 @@  MX28_PAD_PWM4__PWM_4
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				pwm7_pins_a: pwm7@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF1_SDATA0__PWM_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				lcdif_24bit_pins_a: lcdif-24bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <