diff mbox series

[RESEND,2/4] dt-bindings: input: touchscreen: fsl,imx6ul-tsc: add fsl,glitch-threshold

Message ID 20250910135916.3939502-3-dario.binacchi@amarulasolutions.com
State New
Headers
Series Input: imx6ul_tsc - set glitch threshold by dts property |

Commit Message

Dario Binacchi Sept. 10, 2025, 1:58 p.m. UTC 
Add support for glitch threshold configuration. A detected signal is valid
only if it lasts longer than the set threshold; otherwise, it is regarded
as a glitch.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---

 .../input/touchscreen/fsl,imx6ul-tsc.yaml      | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

Comments

Frank Li Sept. 10, 2025, 3:29 p.m. UTC | #1 
On Wed, Sep 10, 2025 at 03:58:36PM +0200, Dario Binacchi wrote:
> Add support for glitch threshold configuration. A detected signal is valid
> only if it lasts longer than the set threshold; otherwise, it is regarded
> as a glitch.
>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> ---
>
>  .../input/touchscreen/fsl,imx6ul-tsc.yaml      | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml b/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml
> index 678756ad0f92..2fee2940213f 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml
> +++ b/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml
> @@ -62,6 +62,23 @@ properties:
>      description: Number of data samples which are averaged for each read.
>      enum: [ 1, 4, 8, 16, 32 ]
>
> +  fsl,glitch-threshold:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    default: 0
> +    enum: [ 0, 1, 2, 3 ]
> +    description: |
> +      Indicates the glitch threshold. The threshold is defined by number
> +      of clock cycles. A detect signal is only valid if it is exist longer
> +      than threshold; otherwise, it is regarded as a glitch.
> +      0: Normal function: 8191 clock cycles
> +         Low power mode: 9 clock cycles
> +      1: Normal function: 4095 clock cycles
> +         Low power mode: 7 clock cycles
> +      2: Normal function: 2047 clock cycles
> +         Low power mode: 5 clock cycles
> +      3: Normal function: 1023 clock cycles
> +         Low power mode: 3 clock cycles
> +

does any property in input/touchscreen/touchscreen.yaml use as it?

Suppose all touch screen have similar property to filiter out glitch.

Frank

>  required:
>    - compatible
>    - reg
> @@ -94,4 +111,5 @@ examples:
>          measure-delay-time = <0xfff>;
>          pre-charge-time = <0xffff>;
>          touchscreen-average-samples = <32>;
> +        fsl,glitch-threshold = <2>;
>      };
> --
> 2.43.0
>

To unsubscribe from this group and stop receiving emails from it, send an email to linux-amarula+unsubscribe@amarulasolutions.com.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml b/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml
index 678756ad0f92..2fee2940213f 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml
@@ -62,6 +62,23 @@  properties:
     description: Number of data samples which are averaged for each read.
     enum: [ 1, 4, 8, 16, 32 ]
 
+  fsl,glitch-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    enum: [ 0, 1, 2, 3 ]
+    description: |
+      Indicates the glitch threshold. The threshold is defined by number
+      of clock cycles. A detect signal is only valid if it is exist longer
+      than threshold; otherwise, it is regarded as a glitch.
+      0: Normal function: 8191 clock cycles
+         Low power mode: 9 clock cycles
+      1: Normal function: 4095 clock cycles
+         Low power mode: 7 clock cycles
+      2: Normal function: 2047 clock cycles
+         Low power mode: 5 clock cycles
+      3: Normal function: 1023 clock cycles
+         Low power mode: 3 clock cycles
+
 required:
   - compatible
   - reg
@@ -94,4 +111,5 @@  examples:
         measure-delay-time = <0xfff>;
         pre-charge-time = <0xffff>;
         touchscreen-average-samples = <32>;
+        fsl,glitch-threshold = <2>;
     };