[22/26] video: mxsfb: support simple frame-buffer

Message ID 20240913095622.72377-23-dario.binacchi@amarulasolutions.com
State New
Headers show
Series
  • Support display (and even more) on the BSH SMM S2/PRO boards
Related show

Commit Message

Dario Binacchi Sept. 13, 2024, 9:56 a.m. UTC
If you want to pass the frame-buffer to the kernel, the video output is
initialized by U-Boot, and kept by the kernel. The patch does not turn
off the power domains or reset the peripheral if you want to support
such feature.

Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---

 drivers/video/mxsfb.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

Patch

diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index 45431f0a1047..06b2a2461246 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -422,7 +422,8 @@  static int mxs_video_remove(struct udevice *dev)
 	if (priv->disp_dev)
 		device_remove(priv->disp_dev, DM_REMOVE_NORMAL);
 
-	mxs_remove_common(priv->reg_base, plat->base);
+	if (!IS_ENABLED(CONFIG_VIDEO_DT_SIMPLEFB))
+		mxs_remove_common(priv->reg_base, plat->base);
 
 	return 0;
 }
@@ -445,6 +446,10 @@  U_BOOT_DRIVER(mxs_video) = {
 	.bind	= mxs_video_bind,
 	.probe	= mxs_video_probe,
 	.remove = mxs_video_remove,
+#if !IS_ENABLED(CONFIG_VIDEO_DT_SIMPLEFB)
 	.flags	= DM_FLAG_PRE_RELOC | DM_FLAG_OS_PREPARE,
+#else
+	.flags	= DM_FLAG_PRE_RELOC | DM_FLAG_OS_PREPARE | DM_FLAG_LEAVE_PD_ON,
+#endif
 	.priv_auto   = sizeof(struct mxsfb_priv),
 };