Toggle navigation
Patchwork
Linux Amarula
Patches
Bundles
About this project
Login
Register
Mail settings
Show patches with
: State =
Action Required
| Archived =
No
| 3769 patches
Series
Submitter
State
any
Action Required
New
Under Review
Accepted
Rejected
RFC
Not Applicable
Changes Requested
Awaiting Upstream
Superseded
Deferred
Search
Archived
No
Yes
Both
Delegate
Apply
«
1
2
3
4
…
37
38
»
Patch
Series
A/R/T
S/W/F
Date
Submitter
Delegate
State
[v3] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2B board
[v3] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2B board
- - -
0 0 0
2025-05-31
Michael Trimarchi
New
[v5,6/6] ARM: mxs_defconfig: select new drivers used by imx28-amarula-rmm
Support i.MX28 Amarula rmm board
- - -
0 0 0
2025-05-30
Dario Binacchi
New
[v5,5/6] ARM: mxs_defconfig: Cleanup mxs_defconfig
Support i.MX28 Amarula rmm board
- - -
0 0 0
2025-05-30
Dario Binacchi
New
[v5,4/6] ARM: dts: mxs: support i.MX28 Amarula rmm board
Support i.MX28 Amarula rmm board
- - -
0 0 0
2025-05-30
Dario Binacchi
New
[v5,3/6] dt-bindings: arm: fsl: add i.MX28 Amarula rmm board
Support i.MX28 Amarula rmm board
1 - -
0 0 0
2025-05-30
Dario Binacchi
New
[v5,2/6] ARM: dts: imx28: add pwm7 muxing options
Support i.MX28 Amarula rmm board
- 1 -
0 0 0
2025-05-30
Dario Binacchi
New
[v5,1/6] dt-bindings: mfd: convert mxs-lradc bindings to json-schema
Support i.MX28 Amarula rmm board
- 1 -
0 0 0
2025-05-30
Dario Binacchi
New
[v4,4/4] configs/imx6ulz_smm_m2_defconfig: Enable clock framework
[v4,1/4] clk: imx: add i.MX6UL clk driver
- - -
0 0 0
2025-05-30
Michael Trimarchi
New
[v4,3/4] mtd: nand: Add support for EDO mode 1-5 to IMX6ULL platform
[v4,1/4] clk: imx: add i.MX6UL clk driver
- - -
0 0 0
2025-05-30
Michael Trimarchi
New
[v4,2/4] mtd: mxs_nand_dt: Move from clk_get/clk_enable to clk_bulk api
[v4,1/4] clk: imx: add i.MX6UL clk driver
- - -
0 0 0
2025-05-30
Michael Trimarchi
New
[v4,1/4] clk: imx: add i.MX6UL clk driver
[v4,1/4] clk: imx: add i.MX6UL clk driver
- 2 1
0 0 0
2025-05-30
Michael Trimarchi
New
[v4,6/6] ARM: mxs_defconfig: select new drivers used by imx28-amarula-rmm
Support i.MX28 Amarula rmm board
- - -
0 0 0
2025-05-29
Dario Binacchi
New
[v4,5/6] ARM: mxs_defconfig: Cleanup mxs_defconfig
Support i.MX28 Amarula rmm board
- - -
0 0 0
2025-05-29
Dario Binacchi
New
[v4,4/6] ARM: dts: mxs: support i.MX28 Amarula rmm board
Support i.MX28 Amarula rmm board
- - -
0 0 0
2025-05-29
Dario Binacchi
New
[v4,3/6] dt-bindings: arm: fsl: add i.MX28 Amarula rmm board
Support i.MX28 Amarula rmm board
1 - -
0 0 0
2025-05-29
Dario Binacchi
New
[v4,2/6] ARM: dts: imx28: add pwm7 muxing options
Support i.MX28 Amarula rmm board
- 1 -
0 0 0
2025-05-29
Dario Binacchi
New
[v4,1/6] dt-bindings: mfd: convert mxs-lradc bindings to json-schema
Support i.MX28 Amarula rmm board
- 1 -
0 0 0
2025-05-29
Dario Binacchi
New
[2/2] package/canopenterm: new package
[1/2] package/pocketpy: new package
- - -
0 0 0
2025-05-29
Dario Binacchi
New
[1/2] package/pocketpy: new package
[1/2] package/pocketpy: new package
- - -
0 0 0
2025-05-29
Dario Binacchi
New
[v3,4/4] ARM: dts: mxs: support i.MX28 Amarula rmm board
Support i.MX28 Amarula rmm board
- - -
0 0 0
2025-05-29
Dario Binacchi
New
[v3,3/4] dt-bindings: arm: fsl: add i.MX28 Amarula rmm board
Support i.MX28 Amarula rmm board
1 - -
0 0 0
2025-05-29
Dario Binacchi
New
[v3,2/4] ARM: dts: imx28: add pwm7 muxing options
Support i.MX28 Amarula rmm board
- - -
0 0 0
2025-05-29
Dario Binacchi
New
[v3,1/4] dt-bindings: mfd: convert mxs-lradc bindings to json-schema
Support i.MX28 Amarula rmm board
- 1 -
0 0 0
2025-05-29
Dario Binacchi
New
[v3,4/4] configs/imx6ulz_smm_m2_defconfig: Enable clock framework
[v3,1/4] clk: imx: add i.MX6UL clk driver
- - -
0 0 0
2025-05-29
Michael Trimarchi
New
[v3,3/4] mtd: nand: Add support for EDO mode 1-5 to IMX6ULL platform
[v3,1/4] clk: imx: add i.MX6UL clk driver
- - -
0 0 0
2025-05-29
Michael Trimarchi
New
[v3,2/4] mtd: mxs_nand_dt: Move from clk_get/clk_enable to clk_bulk api
[v3,1/4] clk: imx: add i.MX6UL clk driver
- - -
0 0 0
2025-05-29
Michael Trimarchi
New
[v3,1/4] clk: imx: add i.MX6UL clk driver
[v3,1/4] clk: imx: add i.MX6UL clk driver
- 2 -
0 0 0
2025-05-29
Michael Trimarchi
New
[v2,4/4] ARM: dts: mxs: support i.MX28 Amarula rmm board
Support i.MX28 Amarula rmm board
- - -
0 0 0
2025-05-28
Dario Binacchi
New
[v2,3/4] dt-bindings: arm: fsl: add i.MX28 Amarula rmm board
Support i.MX28 Amarula rmm board
1 - -
0 0 0
2025-05-28
Dario Binacchi
New
[v2,2/4] ARM: dts: imx28: add pwm7 muxing options
Support i.MX28 Amarula rmm board
- - -
0 0 0
2025-05-28
Dario Binacchi
New
[v2,1/4] dt-bindings: mfd: convert mxs-lradc bindings to json-schema
Support i.MX28 Amarula rmm board
- 1 -
0 0 0
2025-05-28
Dario Binacchi
New
[v2] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2B board
[v2] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2B board
- - -
0 0 0
2025-05-27
Michael Trimarchi
New
bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2B board
bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2B board
- - -
0 0 0
2025-05-26
Michael Trimarchi
New
[1/1] package/uuu: fix gcc-15 compile errors
[1/1] package/uuu: fix gcc-15 compile errors
- - -
0 0 0
2025-05-26
Dario Binacchi
New
bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2B board
bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2B board
- - -
0 0 0
2025-05-24
Michael Trimarchi
New
[1/1] board: bsh: imx8mn-bsh-smm-s2: fix U-Boot startup
[1/1] board: bsh: imx8mn-bsh-smm-s2: fix U-Boot startup
- - -
0 0 0
2025-05-23
Dario Binacchi
New
[v3,4/4] board: bsh: imx6ulz_smm_m2: Add delay between DRAM read access
[v3,1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table
- - -
0 0 0
2025-05-21
Dario Binacchi
New
[v3,3/4] board: bsh: imx6ulz_smm_m2: Add support for 512 MiB DRAM
[v3,1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table
- - -
0 0 0
2025-05-21
Dario Binacchi
New
[v3,2/4] board: bsh: imx6ulz_smm_m2: Add support for 256 MiB DRAM
[v3,1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table
- - -
0 0 0
2025-05-21
Dario Binacchi
New
[v3,1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table
[v3,1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table
- - -
0 0 0
2025-05-21
Dario Binacchi
New
[3/3] ARM: dts: mxs: support i.MX28 Amarula rmm board
Support i.MX28 Amarula rmm board
- - -
0 0 0
2025-05-21
Dario Binacchi
New
[2/3] dt-bindings: arm: fsl: add i.MX28 Amarula rmm board
Support i.MX28 Amarula rmm board
- - -
0 0 0
2025-05-21
Dario Binacchi
New
[1/3] ARM: dts: imx28: add pwm7 muxing options
Support i.MX28 Amarula rmm board
- - -
0 0 0
2025-05-21
Dario Binacchi
New
[v2,4/4] board: bsh: imx6ulz_smm_m2: Add delay between DRAM read access
[v2,1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table
- - -
0 0 0
2025-05-20
Dario Binacchi
New
[v2,3/4] board: bsh: imx6ulz_smm_m2: Add support for 512 MiB DRAM
[v2,1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table
- - -
0 0 0
2025-05-20
Dario Binacchi
New
[v2,2/4] board: bsh: imx6ulz_smm_m2: Add support for 256 MiB DRAM
[v2,1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table
- - -
0 0 0
2025-05-20
Dario Binacchi
New
[v2,1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table
[v2,1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table
- - -
0 0 0
2025-05-20
Dario Binacchi
New
board: freescale: imx8mn_evk: let clock system enable UART clock
board: freescale: imx8mn_evk: let clock system enable UART clock
- - 1
0 0 0
2025-05-20
Dario Binacchi
New
[v3,5/5] board: bsh: imx8mn_bsh_smm_s2/s2pro: let clock system enable UART clock
Restore imx8mn_bsh_smm_s2 properly booting
- - -
0 0 0
2025-05-20
Dario Binacchi
New
[v3,4/5] board: bsh: imx8mn_bsh_smm_s2/s2pro: enlarge CONFIG_SPL_SYS_MALLOC_F_LEN
Restore imx8mn_bsh_smm_s2 properly booting
- 1 -
0 0 0
2025-05-20
Dario Binacchi
New
[v3,3/5] configs: imx8mn_bsh_smm_s2: load U-Boot from raw NAND
Restore imx8mn_bsh_smm_s2 properly booting
- - -
0 0 0
2025-05-20
Dario Binacchi
New
[v3,2/5] imx: spl_imx_romapi: support raw NAND sector
Restore imx8mn_bsh_smm_s2 properly booting
- - -
0 0 0
2025-05-20
Dario Binacchi
New
[v3,1/5] spl: Kconfig: support U-Boot load from raw NAND
Restore imx8mn_bsh_smm_s2 properly booting
- - -
0 0 0
2025-05-20
Dario Binacchi
New
timezone: Replace Localtime file copy with symbolic link
timezone: Replace Localtime file copy with symbolic link
- 1 -
0 0 0
2025-05-19
Andrea Ricchi
New
[linux-next,1/1] clk: imx: imx8mm-anatop: probe only on i.MX8MM platforms
[linux-next,1/1] clk: imx: imx8mm-anatop: probe only on i.MX8MM platforms
- - 1
0 0 0
2025-05-16
Dario Binacchi
New
clk: imx: add i.MX6UL clk driver
clk: imx: add i.MX6UL clk driver
- - -
0 0 0
2025-05-15
Michael Trimarchi
New
[meta-oe,1/1] connman: patch CVE-2025-32366 and CVE-2025-32743
[meta-oe,1/1] connman: patch CVE-2025-32366 and CVE-2025-32743
- - -
0 0 0
2025-05-15
Dario Binacchi
New
[1/1] board/bsh/imx8mn-bsh-smm-s2: erase the entire NAND chip
[1/1] board/bsh/imx8mn-bsh-smm-s2: erase the entire NAND chip
- - -
0 0 0
2025-05-15
Dario Binacchi
New
[v3,2/2] arm: imx: imx8m: soc: replace ifdef by IS_ENABLED()
[v3,1/2] arm: imx: imx8m: soc: fix the macro name
- 1 -
0 0 0
2025-05-15
Dario Binacchi
New
[v3,1/2] arm: imx: imx8m: soc: fix the macro name
[v3,1/2] arm: imx: imx8m: soc: fix the macro name
- 2 -
0 0 0
2025-05-15
Dario Binacchi
New
[RFC,v2,4/4] serial: mxc: restore booting for imx8mn_bsh_smm_s2
Restore imx8mn_bsh_smm_s2 properly booting
- - -
0 0 0
2025-05-15
Dario Binacchi
New
[RFC,v2,3/4] configs: imx8mn_bsh_smm_s2: load U-Boot from raw NAND
Restore imx8mn_bsh_smm_s2 properly booting
- - -
0 0 0
2025-05-15
Dario Binacchi
New
[RFC,v2,2/4] imx: spl_imx_romapi: support raw NAND sector
Restore imx8mn_bsh_smm_s2 properly booting
- - -
0 0 0
2025-05-15
Dario Binacchi
New
[RFC,v2,1/4] spl: Kconfig: support U-Boot load from raw NAND
Restore imx8mn_bsh_smm_s2 properly booting
- - -
0 0 0
2025-05-15
Dario Binacchi
New
[v2,2/2] arm: imx: imx8m: soc: replace ifdef by IS_ENABLED()
[v2,1/2] arm: imx: imx8m: soc: fix the macro name
- 1 -
0 0 0
2025-05-15
Dario Binacchi
New
[v2,1/2] arm: imx: imx8m: soc: fix the macro name
[v2,1/2] arm: imx: imx8m: soc: fix the macro name
- 1 -
0 0 0
2025-05-15
Dario Binacchi
New
[RFC,3/3] serial: mxc: restore booting for imx8mn_bsh_smm_s2
Restore imx8mn_bsh_smm_s2 properly booting
- - -
0 0 0
2025-05-15
Dario Binacchi
New
[RFC,2/3] configs: imx8mn_bsh_smm_s2: restore CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
Restore imx8mn_bsh_smm_s2 properly booting
- - -
0 0 0
2025-05-15
Dario Binacchi
New
[RFC,1/3] spl: Kconfig: allow to enable SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR for i.MX8M
Restore imx8mn_bsh_smm_s2 properly booting
- - -
0 0 0
2025-05-15
Dario Binacchi
New
[V2] timezone: Fix compare_file comparison in timezone checking
[V2] timezone: Fix compare_file comparison in timezone checking
- - -
0 0 0
2025-05-15
Michael Trimarchi
New
timezone: Fix compare_file comparison in timezone checking
timezone: Fix compare_file comparison in timezone checking
- - -
0 0 0
2025-05-15
Michael Trimarchi
New
arm: imx: imx8m: soc: fix the macro name
arm: imx: imx8m: soc: fix the macro name
- 1 -
0 0 0
2025-05-15
Dario Binacchi
New
[9/9] arm64: dts: imx8mn-bsh-smm-s2-common: Disable PMIC SNVS reset target state
DTS updates for BSH SMM S2[PRO] boards
- - -
0 0 0
2025-05-14
Dario Binacchi
New
[8/9] arm64: dts: imx8mn-bsh-smm-s2-common: Increase drive strength of pmic irq
DTS updates for BSH SMM S2[PRO] boards
- 1 -
0 0 0
2025-05-14
Dario Binacchi
New
[7/9] arm64: dts: imx8mn-bsh-smm-s2-common: Set minimum value for VDD_3V3
DTS updates for BSH SMM S2[PRO] boards
- - -
0 0 0
2025-05-14
Dario Binacchi
New
[6/9] arm64: dts: imx8mn-bsh-smm-s2-common: Set minimum value for VDD_DRAM_VPU_GPU
DTS updates for BSH SMM S2[PRO] boards
- - -
0 0 0
2025-05-14
Dario Binacchi
New
[5/9] arm64: dts: imx8mn-bsh-smm-s2-common: Pull Up Console UART pins
DTS updates for BSH SMM S2[PRO] boards
- 1 -
0 0 0
2025-05-14
Dario Binacchi
New
[4/9] arm64: dts: imx8mn-bsh-smm-s2-common: Enable GPU for smms2 and smms2pro
DTS updates for BSH SMM S2[PRO] boards
- 1 -
0 0 0
2025-05-14
Dario Binacchi
New
[3/9] arm64: dts: imx8mn-bsh-smm-s2-common: Keep wifi enable during suspend
DTS updates for BSH SMM S2[PRO] boards
- 1 -
0 0 0
2025-05-14
Dario Binacchi
New
[2/9] arm64: dts: imx8mn-bsh-smm-s2-common: Leave regulator under hw state machine
DTS updates for BSH SMM S2[PRO] boards
- - -
0 0 0
2025-05-14
Dario Binacchi
New
[1/9] arm64: dts: imx8mn-bsh-smm-s2-common: Define suspend voltage threshold
DTS updates for BSH SMM S2[PRO] boards
- - -
0 0 0
2025-05-14
Dario Binacchi
New
[3/3] ARM: dts: imx6ulz-bsh-smm-m2: Update wifi/bluetooth pinctrl
[1/3] ARM: dts: imx6ulz-bsh-smm-m2: Enable hardware rng
- - -
0 0 0
2025-05-14
Dario Binacchi
New
[2/3] ARM: dts: imx6ulz-bsh-smm-m2: Enable uart2
[1/3] ARM: dts: imx6ulz-bsh-smm-m2: Enable hardware rng
- - -
0 0 0
2025-05-14
Dario Binacchi
New
[1/3] ARM: dts: imx6ulz-bsh-smm-m2: Enable hardware rng
[1/3] ARM: dts: imx6ulz-bsh-smm-m2: Enable hardware rng
- - -
0 0 0
2025-05-14
Dario Binacchi
New
AW: [PATCH 1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table
AW: [PATCH 1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table
- - -
0 0 0
2025-05-13
'Arnout Vandecappelle' via Amarula Linux
New
[4/4] board: bsh: imx6ulz_smm_m2: Add delay between DRAM read access
[1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table
- - -
0 0 0
2025-05-13
Dario Binacchi
New
[3/4] board: bsh: imx6ulz_smm_m2: Add support for 512 MiB DRAM
[1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table
- - -
0 0 0
2025-05-13
Dario Binacchi
New
[2/4] board: bsh: imx6ulz_smm_m2: Add support for 256 MiB DRAM
[1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table
- - -
0 0 0
2025-05-13
Dario Binacchi
New
[1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table
[1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table
- - -
0 0 0
2025-05-13
Dario Binacchi
New
[1/1] package/connman: fix CVE-2025-32366
[1/1] package/connman: fix CVE-2025-32366
- - -
0 0 0
2025-05-13
Dario Binacchi
New
[1/1] board/bsh/imx6ulz-bsh-smm-m2: flash U-Boot
[1/1] board/bsh/imx6ulz-bsh-smm-m2: flash U-Boot
- - -
0 0 0
2025-05-12
Dario Binacchi
New
[1/1] configs/imx6ulz_bsh_smm_m2: bump Linux to 6.12.28
[1/1] configs/imx6ulz_bsh_smm_m2: bump Linux to 6.12.28
- - -
0 0 0
2025-05-12
Dario Binacchi
New
[2/2] package/connman: fix CVE-2025-32743
[1/2] package/connman: bump to version 1.44
- - -
0 0 0
2025-05-12
Dario Binacchi
New
[1/2] package/connman: bump to version 1.44
[1/2] package/connman: bump to version 1.44
- - -
0 0 0
2025-05-12
Dario Binacchi
New
[11/11] arm64: dts: imx8mn-bsh-smm-s2: Enable the bbt on flash
Update imx8mn-bsh-smm boards
- - -
0 0 0
2025-05-12
Michael Trimarchi
New
[10/11] arm64: dts: imx8mn-bsh-smm-s2-common: Disable PMIC SNVS reset target state
Update imx8mn-bsh-smm boards
- - -
0 0 0
2025-05-12
Michael Trimarchi
New
[09/11] arm64: dts: imx8mn-bsh-smm-s2-common: Increase drive strength of pmic irq
Update imx8mn-bsh-smm boards
- - -
0 0 0
2025-05-12
Michael Trimarchi
New
[08/11] arm64: dts: imx8mn-bsh-smm-s2-common: Set minimum value for VDD_3V3
Update imx8mn-bsh-smm boards
- - -
0 0 0
2025-05-12
Michael Trimarchi
New
[07/11] arm64: dts: imx8mn-bsh-smm-s2-common: Set minimum value for VDD_DRAM_VPU_GPU
Update imx8mn-bsh-smm boards
- - -
0 0 0
2025-05-12
Michael Trimarchi
New
[06/11] arm64: dts: imx8mn-bsh-smm-s2-common: Pull Up Console UART pins
Update imx8mn-bsh-smm boards
- - -
0 0 0
2025-05-12
Michael Trimarchi
New
«
1
2
3
4
…
37
38
»